Oppo Reno 7, Reno 7 Pro Price, Key Specifications Surface Online; MediaTek Chipsets Expected

[ad_1]

The launch of the Oppo Reno 7 series seems imminent as the price, design and specifications of the expected smartphones in the series have surfaced online. China’s 3C certification site points to the charging capability, while a report details the processor, RAM and storage specifications of the upcoming smartphones. More reports have suggested the design of the Oppo Reno 7 Pro through patent images, key specifications of the vanilla Oppo Reno 7 as well as the prices of both the smartphones expected in the Oppo Reno 7 series.

Oppo Reno 7, Reno 7 Pro Price (Expected)

a report good GSMArena has slashed the prices of Oppo Reno 7 series. The 8GB RAM + 256GB storage variant of the Oppo Reno 7 is said to retail for CNY 2,999 (approximately Rs 35,200), while the 12GB RAM + 256GB storage variant may cost CNY 3,299 (approximately Rs 38,700).

Oppo Reno 7 Pro Specifications, Design (Expected)

There was a 3C listing for Oppo Reno 7 Pro spotty by mysmartprice. The certification does not reveal much information about the smartphone. It mentions the model designation – PFDM00 – Upcoming Opposition The smartphone is there and it will come with 65W SuperVOOC 2.0 fast charging support. The phone is said to pack a 4,500mAh battery. The report also suggests that the Oppo Reno 7 Pro could be powered by MediaTek Dimensity 1200 SoC, potentially paired with up to 12GB of RAM and 256GB of onboard storage. The smartphone is expected to be launched in a few months.

Last week, LetsGoDigital (in Dutch) share Patent images of the Oppo Reno 7 Pro smartphone that the Chinese tech giant had reportedly filed with the National Intellectual Property Administration (CNIPA) of China. The renders reveal that the upcoming smartphone will feature a flat display with a hole-punch cutout on the left top corner and thin bezels on all sides. It is shown with a power button on the right and two volume buttons on the left. It reportedly gets a 3.5mm headphone jack on the top, while there’s a SIM tray, USB Type-C port, and a speaker grille at the bottom.

The rear side of the Oppo Reno 7 Pro flaunts a quad rear camera setup that is housed in a rectangular housing at the top left corner. The three sensors seem to be in a line with the flash. The fourth sensor is shown to the right of the rest of the sensor. The fourth sensor is said to be optional as Oppo has submitted a patent with and without the fourth sensor. Alternatively, another patent shows the smartphone without a hole-punch cutout for the selfie camera, which could mean an under-display sensor.

Oppo Reno 7 Specifications (Expected)

Earlier this month, tipster Abhishek Yadav (@yabhishekhd)- referring to A source on Weibo – share An image showing the front and back of the smartphone along with some key specifications of the vanilla Oppo Reno 7. Yadav mentioned that the upcoming smartphone will feature a 6.5-inch full-HD+ display by BOE with 90Hz refresh rate and 10-bit color. The standard Oppo Reno 7 is said to be powered by MediaTek Dimensity 920 SoC with LPDDR4x RAM and UFS 3.1 storage. Yadav also said that the smartphone will get a 4,500mAh battery with 65W fast charging support.

Yadav further mentioned that the triple rear camera setup of the Oppo Reno 7 will feature a 50-megapixel Sony IMX766 sensor – Tip The feature on the Oppo Reno 7 Pro as well is an 8-megapixel Sony IMX355 sensor and a 2-megapixel tertiary sensor. The Oppo Reno 7 is said to get a 32-megapixel Sony IMX615 sensor on the front. The cameras will reportedly feature a Z-axis linear motor, NFC, and a vapor chamber liquid cooling system.


Affiliate links may be generated automatically – see our moral statement For details.

.

[ad_2]